Laticrete Tile Adhesive 307 (Ideal for Tile on Tile/Stone Installations)

1558 Views

415.00

Availability: 15 in stock

415.00

Availability: 15 in stock

Buy Now
Add to cart
SKU: Laticrete307 Category: Tags:
Report Abuse

Product Description

LATICRETE® 307 floor and wall tile adhesive is a smooth and creamy thin-set Adhesive for installing small to medium format ceramic wall and floor tiles in interior areas. For improved performance and exterior use, fortify with LATICRETE® 73 Crete Admix.

Features & Benefits

 

  • For fixing ceramic tiles on interior floor & wall
  • Ideal for new floor tiling
  • Smooth & Creamy
  • Single component – Just add water

 

Product Details

 

Packaging 20 kg & 50 kg Bags  Coverage Approx. 55-60 sq.ft. per 20 kg bag with a ¼” x ¼” (6mm x 6mm) square notch trowel for a bed of 3mm. Color Grey Certification

  • ANSI: 118.1 T
  • EN 12004/ISO 13007:CIT
  • IS 15477:2019: TYPE 1  T ADHESIVE
  • VOC:Practically Nil

 

How to apply

 

Substrate: The surface to be covered with Ceramic tile shall be sound and confirm to good design, rigid, clean and free of dirt, oil, grease, curing compounds, form release agents or loose plaster and paint. For economy the surfaces should be level and true with in: Walls – 3mm in 2.5m Floors – 1.5mm in 1.0m Surface Preparation:

  • If a plaster/leveling mortar bed is applied, ensure that it is cured for at least 7 days to achieve proper strength before application of tile adhesive for installation of tile
  • Ensure the substrate is clean and free from impurities like dust, dirt, debris, oil, grease, curing agents, loose plaster etc
  • Dampen the wall before application of thin set adhesive
  • Clean the back of tile for any dust or coating

Mixing: The products can be mixed by hand or slow speed electric drill mixer (less than 300 rpm). Pour potable clean water in a clean container and then add the powder LATICRETE® 307 and mix until the mixture becomes creamy and plastic. Do not over mix. Leave the mix to slake for 5-10 min and remix before use. Mix only sufficient quantity of adhesive for an immediate need. Proportion: Approximately 1 bag of LATICRETE® 307 with 5-6 ltrs of water. Adjust the quantity of liquid to obtain proper consistency. Installation:

  • Wet the surface and remove the excess water before applying the adhesive. Ensure the area is shaded from sunlight. The adhesive shall be applied with the flat side of the trowel using a scraping motion to work the material into good contact with the surface to be covered.
  • Additional mortar is then applied with the notched edge of the trowel.
  • When installing large tiles, spread adhesive onto the back of tile in addition to trowelling material over a surface to be tiled. Select proper type of notched trowel.

a) Thin Tiles upto size 300 X 300 mm (1’X1’), use a square notched trowel of size 6mm X 6mm to provide a total thickness of 3mm

b) Large Porcelain Tiles upto 450 X 450 mm with ribs, use a square notched trowel of size 6mm X 6mm and back butter the tiles with the same adhesive to a thickness of 1-1.5mm to provide a total thickness of 4.5mm

c) Large Porcelain Tiles upto 600 X 600 mm (2’X2’) with ribs, use a square notched trowel of size 6mm X 9mm and back butter the tiles with the same adhesive to a thickness of 1-1.5mm to provide a total thickness of 6mm

  • The most important standard to keep in mind is to insure that the piece of tile is completely bedded in the mortar or adhesive with 100% coverage.
  • Rear face of tiles (especially Porcelain tiles) should be cleaned with damp sponge to clean all the dust. Do not saturate in water.
  • Excess mortar on adhesive shall be cleaned from the surface of the stone with wet cloth or sponge while the mortar is fresh.

Areas of Application Designed for interior floor & wall applications Suitable Substrates

  • Cement Mortar Beds
  • Existing tiling on floor & wall Ceramic Tile and Stones (when mixed with LATICRETE® 73 Mortar Admixture)
  • Cement Plaster
  • Brick Masonry
  • Terrazzo

Ready to ship in 1 business day from India


 

Shipping Policy

All Shipments done by RenovatEasy.


 

Refund Policy

Refunds, if any, shall be processed in 2 working days.

Weight 20 kg
Base

Grey

Brand

Laticrete

Reviews

There are no reviews yet.

Be the first to review “Laticrete Tile Adhesive 307 (Ideal for Tile on Tile/Stone Installations)”

Your email address will not be published. Required fields are marked *

Product Location

F-156, Near Ambedkar Gate, Jagat Puri, Krishna Nagar, New Delhi, Delhi 110051, India

Vendor Information

  • Store Name: KwatraTiles
  • Vendor: KwatraTiles
  • Address: F-156 Jagat Puri
    Main Road
    New Delhi 110051
    Delhi
  • No ratings found yet!

Product Enquiry

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our Renovateasy Policy.

Back to top